Falcon 260

Type : Fully Automated Discrete Random Access Analyzer. Bench Top Floor Model optional
Throughput : 260 tests per hour Biochemistry.
Sample Process : Patient oriented, Batch. STAT prioritized. Continuous loading
Methods : End Point. Fixed Time. Kinetic. Multi Standard. Multi Reagent. Bi-chromatic
Test Storage : Unlimited test programs. Organ Profiles. Test Panels
Refrigeration : On board cooling for Reagents, Samples. Calibrators. Standards. Controls with ON/OFF Switch
Quality Control : program with Levy Jennings. Multiple lots. QC charts, etc.
Calculation : Can calculate other tests by ratio or formulas automatically
External Tests : Facility to input other test values and print reports

Download Brochure

SPECIFICATIONS

Probes : 2 probes. One for Reagent & sample dispense and second for Sample mixing.
Probe function : Level detection, Vertical and Sideways anti-collision. Depth adjustment.
Probe Wash : Both probes wash in and out after every use.

Reagent Positions : 40 positions with removable tray
Reagent Volume : 10 ul to 400 ul with 1 ul increment, separate reagent syringe of 500 ul for better accuracy
Reagent Inventory : Continuous monitoring, Alarm when reagent low
Multiple Reagent : Up to 2 reagents per tests can be programmed

Wavelengths : 9 long life wavelengths in 300 nm to 700 nm range with +/- 2 nm precision
Reading : Can set readings with monochromatic or bi-chromatic wavelengths
Abs. Range : 0.0 — 4.0 Abs.
Lamp : Halogen-Tungsten lamp with long life

Sample Positions : 40 positions with continuous loading for samples, calibrators, controls, STAT samples .
Container Type : Cups, Transport vials, Primary tubes, 100 ul dead volume. Alarm when sample low
Sample Volume : 2-50 ul with 0.1 ul increment, separate sample syringe of 50 ul for better accuracy
STAT Samples : STAT / Emergency samples can be added anytime and anywhere during process

Cuvettes : 90 reusable high quality cuvettes on board. Individual cuvette can be replaced if necessary
Read Volume : Minimum 150 ul for less reagent consumption
Washing : 8 steps on board washing and drying of cuvettes
Water Usage : 2-3 Liters per hour
Cuvettes Scan : All cuvettes scanned and bad cuvettes detected to avoid wrong results
Mixing : Mixing of Reagent and Sample in cuvette by separate mixer probe
Reaction Temp. : Maintained at 37*C +/- 0.1*C by dryAir bath for accurate results
Online Reaction : Online real time reaction curve displayed for each test